I just played around a little bit,  you know what?  it won't let me change
those settings on 2 different computers,  now I'm completely stumped.
John Miller N1UMJ
Owner: J E M Racing need sponsors and crew help
to chat with me  AOL instant messenger JEMracing3
----- Original Message -----
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, June 11, 2003 8:23 PM
Subject: Re: packet help


> John,
>
> You need to make sure that the settings for your COM port agree with the
> settings in the PK-232.  Specifically, check baud rate (probably matches
or
> you wouldn't get anything intelligible), stop bits, parity, and
> handshake.  Also, make sure that local echo is turned off in Hyper
> Terminal.  In the PK-232, that setting may be called Duplex, and you want
> it set to Full.  If Local Echo is on or Duplex is set to Half, everything
> you type will be sent to the PK-232 twice.  You'll probably have to do
some
> experimenting, but with a little patience I think you can make the two
> devices talk to each other.  Good luck.
>
> Steve
>
> On Wednesday 6/11/03 18:01 John miller wrote:
> >I don't know what settings to look at,  I basically left everything as it
> >is, 8 stop bits, and all,  I know the baud is right but I'm wondering if
I
> >change programs if I'll have to do that again because it's just not
working
> >at all with the other program.  I don't know, thanks,  I'll keep playing
> >with it when I have time.
> >John Miller N1UMJ
> >Owner: J E M Racing need sponsors and crew help
> >to chat with me  AOL instant messenger JEMracing3
> >----- Original Message -----
> >From: "Butch Bussen" <[log in to unmask]>
> >To: <[log in to unmask]>
> >Sent: Wednesday, June 11, 2003 4:56 PM
> >Subject: Re: packet help
> >
> >
> > > It has been a long time since I ran a 232.   I use to use commo.  If
it is
> > > saying what, I doubt if the baud rate uis wrong, or you wouldn't see
> > > anything but garbage on the output.  Check stop bits, and also take a
look
> > > at cr plus linefeed settings.  Just been too long.
> > > 73s
> > > Butch Bussen
> > > wa0vjr
>