>I recently purchased (2) brand new Biostar M6VCF mobo's and, installed
>them in mid-towers with 250watt power supplies. After following the
>set-up procedures outlined in their guides, I encountered the following
>problems. (1)--pushing the power on button lights the power-on led
>along with the HD led and it does it's blinking and such.
>....

The first you should get to BIOS setup. For this follow:
1. Check BIOS battery.
2. In the Matherboard you should to install one RAM, CPU and video- card (in AGP
slot)only. No FDD, HDD etc.!
Note that the jumpers for RAM and CPU should be in the default positions!
3. In the PC install keyboard  and display only!
4. Check AT or ATX format.
5. Then turn- on power and press <Del>.

If the video BIOS doesn't appear and you hear system bips from
POST codes, then you should to know the meaning of these bips from
motherboad developer.

PS: RAM, CPU and video card should be checked first on the working
mashine.
--
Best regards,
 Yakymakha

         PCBUILD maintains hundreds of useful files for download
                     visit our download web page at:
                  http://freepctech.com/downloads.shtml