Subject: | |
From: | |
Reply To: | |
Date: | Wed, 17 Oct 2001 20:54:46 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Marshall,
Have you looked into your CMOS settings to make sure the IDE drives are on
Auto Detect?
Try checking your master/slave settings again. You didn't say what brand
the 6 gig drive was - many have a stand alone setting that doesn't work as a
master and will prevent the slave from being identified.
Good luck,
Rand Blunck
Why Not Try Computing
Glendale, AZ
----- Original Message -----
From: "Fortescue, Marshall" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, October 17, 2001 5:33 PM
Subject: [PCBUILD] Hard Drive Blues
> Help!!
>
> I have been trying to get 2 hard drives to be visible to my system. I
have
> a celeron 360, WinME, 1 20G Maxtor drive and a drive that came with the
> computer (6 G)...It was suggested by someone on the list that I may have a
> problem having two drives on the same IDE cable and to have one cable with
> CD and Hard Drive, the other IDE with CDRW and other HD. I tried that and
> was careful with master/slave arrangement.
>
> It didn't work...In fact it only gave me my 6G HD (which is really not the
> drive I need (It doesn't have all of my data on it!)
>
> So, I tried to go back to the way it was...I put both CD drives on one IDE
> and then the two HDs on the other. Still didn't get back to the way it
was.
> So, I disconnected the HD (6 Gig) that I didn't really want and only had
one
> drive on the IDE. The drive is a Maxtor and therefore is not what windows
> thinks is "ATAPI compatible" (whatever that means.) I've tried to use
the
> Maxtor boot disk to run fdisk and it will only let me format the
disk...(it
> has over 10 G of stuff on it!). And, using a WinME boot disk doesn't work
> because it doesn't find the Maxtor drive ("no fixed disk present" error
> message.
>
> Is there any hope getting all of my drive and the info on the drive back??
>
> I am feeling hopeless!
>
> Please help and TIA
> marshall
>
> ===
> > Marshall Fortescue
> > Direct 603.245.2382
> > SDN 8-475-2382
> > Pager 888.394.6547 or
> > mailto:[log in to unmask]
> >
> >
>
> Visit our website regularly for FAQs,
> articles, how-to's, tech tips and much more
> http://freepctech.com
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml
|
|
|