Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 21 Nov 2002 09:49:16 -0700 |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
Peter;
I've been building P4 systems with the .13 micron northwood processors on
the Asus P4S533 motherboards
http://www.asus.com.tw/mb/socket478/p4s533/overview.htm
I was a little leary of the Sis 645 chipset, but it seems to be a really
stable board.
Has more features than you can shake a stick at.
Uses up to DDR-333mhz (PC2700) memory
Looks like pretty good Linux compatibility:
http://www.linuxtested.com/results/asus_p4s533-bm.html
Folks seem to like this board for stability over on the Asus newsgroup
I've also used the Abit SA7 board on a couple of systems.
both these boards run at 400/533 front side bus speed.
and will run P4 processors at least up to 2.53gig.
I would recommend a board with 533mhz FSB,
seems to be where Intel is heading.
<>< Larry Fisk
Fisk Computers
Fruitvale, Idaho
----- Original Message -----
From: "Peter Shkabara" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, November 20, 2002 7:04 PM
Subject: [PCBUILD] motherboard
> I am afraid this may start a long debate, but I would like some
> recommendations for a motherboard. The plan is to build a stable system
> using a 2GHz P4. It is mostly for business applications and some
> graphics, no games. Am considering the Intel D845PEBT2. Also looked into
> an ASUS P4S8X after reading some good reviews, but also found some very
> bad stability problems reported by some users. To make things worse, I
> am not opposed to using an AMD chip. Again, the primary goal is
> stability - intended OS is XP Pro and possibly Linux.
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml
|
|
|