Hi:
you may not be able to physically fit the card in the slot. the new cards
may have a different tab argangment and may not phyicaly fit. That is
because of voltage differences in the cards. New boards changed the design
of the AGP slot so older cards would not fit. Card manufactorers put 2
slots in the tab so the will fit and work in old or new boards
Either way you will not obtain the full potential of the card in that
system if it is not a 4x agp slot on the board
At 02:36 PM 08/04/2002 -0500, you wrote:
>Hello everyone, a quick qeustion here.
>
>I am about to buy a new 3D accelerator that is AGP 2.0 compliant
>(2X/4X), but my motherboard has an AGP 1.0 slot (1X/2X). Will I have any
>trouble?
>
>Thanks in advance.
>
>Cesar Daniel
>
> The NOSPIN Group provides a monthly newsletter with great
> tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
> Visit our web site to signup: http://freepctech.com
>
Thanks,
Joe
PCBUILD maintains hundreds of useful files for download
visit our download web page at:
http://freepctech.com/downloads.shtml