Subject: | |
From: | |
Reply To: | |
Date: | Sun, 27 Apr 2003 12:41:15 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello,
I am not sure if this is a software or hardware problem but am sending
to PC BUILD as I think it is hardware. When I put in a music cd, store
bought or CDR, or a software cd, like Printmaster, the plug and play
will not kick in. I have to go to RUN and select the drive and then
BROWSE to jump start the cd to play.
I installed a CDRW in the bay below the CD Rom drive 3 years ago and
have not had any problems until about November this year. Only other
thing I have done is replaced the CD ROM dirve for a combination CD/DVD
drive. I did that about 2 years ago. I do not remember doing anything
different to these drives. My slave and primary is set up correctly as
it all worked fine til November, just a few months ago.
I was burning cdrs, copying a cd, and using HP CDRW software to burn
them. I did about 4 copies of that cd and did not use the CD ROM drive
again til Christmas time when I was attempting to play a CD I had
received for Christmas. I had to open up MUSIC MATCH and click on FILE
etc to play that CD. And every CD I have played since then, this is how
I must use the drive. Open up Music Match and select Play.
Today I used my Lens cleaner to clean the CD/DVD drive and I cleaned the
drive more then a dozen times and still did not HEAR the TEST music
after each cleaning.
I hope somebody has some ideas.
My system specs are
Home built computer
350 P11
128 memory
Windows 98 SE
thank you tannis zamora
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://freepctech.com
|
|
|