Subject: | |
From: | |
Reply To: | |
Date: | Sun, 7 Jan 2001 19:07:07 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Raymond,
Since my original post to you, I have learned that there
are a few drives with special jumper settings --- like yours.
HOWEVER
According to the Fujitsu web site, your drive MAY
be capable of accessing it's full potential by using the
"special" jumper settings.
I saw nothing that supports your statement that the drive
is permanently limited in size.
Unfortunately, Fujitsu's web construction uses an odd combination
of frames and image files rather than text, so I can't give you the
exact URL but go to www.fcpa.com and click the links
for SUPPORT -- HARD DRIVES -- then pick your model --
and finally click the option for SEE JUMPER SETTINGS
There you will find information about your drive and how it
can be set up to "see" the full 6,704 cylinders.
But..... as I said in my previous post.......
Assuming your BIOS and/or HDD controller
can handle the larger drive size
The problem is not as much with the drive itself, but
the controller (and BIOS) which accesses the drive.
I have had several clients in a similar situation as yours.
They upgraded hard drives to sizes that were larger than
the PC could handle and then later upgraded the PC.
In each case, I was successful in gaining access to the
full drive.
Once the PC MoBo was upgraded, I used FDISK to
set up the additional cylinders and then used Partition Magic
to combine the partitions into a single unit.
----- Original Message -----
From: "Raymond Keirn" <[log in to unmask]>
> Jun Qian wrote :
>
>
> >The only way I know of to get the full size back without destroy
everything
> >on it is: use some kind of back up program (eg Norton Ghost) to make an
> >image of the disk (perfered on a CD), then you must delete partition
> >(change
> >the HDD back to its full size), use the backup image to restore
everything.
> -
> Fujitsu Hdd model # MPB 3032ATU, I wishI could show you a picture but ,
This
> model carries a set of special jumpers
> which says ( special mode jumper settings )for each mode - master, slave
and
> cable select. It limits the number of drive cylinders for all models to
> 4,092.
> I cannot copy using anything as I only have a cdrom and floppy drive . Is
> moving it to a new controller with it`s own bios still an option .
>
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
> The NOSPIN Group Promotions is now offering
> Mandrake Linux or Red Hat Linux CD sets along
> with our NOSPIN Power Linux CD... at a great price!!!
> http://freepctech.com/goodies/promotions.shtml
>
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://nospin.com
|
|
|