Subject: | |
From: | |
Reply To: | |
Date: | Wed, 10 Apr 2002 17:48:25 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
On Tue, 9 Apr 2002 20:48:02 +0200 Brendon Schafer
<[log in to unmask]> writes:
> This is the procedure I try to follow if there is a problem on my
> little 3 PC network at home.
>
> Setup up computer 1. Make sure that the correct network card is
> setup under network neighbourhood (Right click the icon select
> properties, OR Control Panel > Network). Install TCP/IP. You've
> already installed Client for Microsoft Networks. Click on File and
> Print Sharing. and check both boxes once you have read them and
> agree that that is what you want to do.
> Select the TCP/IP protocol and click properties and on IP Address
> tab, Specify IP address and type in the value 192.168.1.0 in IP
> Address and the value 255.255.255.0 for the Subnet Mask. Also
> make sure that you have a device shared (A printer or a folder or a
> drive).
>
> Now go to your other PC and do exactly the same thing except type
> the IP address as 192.168.1.1 with the same Subnet Mask.
>
> You should now see both computers on the network.
Following above, I just see host computer on each network neighborhood.
Using find IP addresses automatically, one network shows both computers,
other network doesn't show either computer.
Demetri Kolokotronis
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://freepctech.com
|
|
|