PCBUILD Archives

Personal Computer Hardware discussion List

PCBUILD@LISTSERV.ICORS.ORG
Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
PCBUILD - Personal Computer Hardware discussion List <[log in to unmask]>
Date:
Tue, 24 Apr 2001 13:45:58 -0400
Reply-To:
PCBUILD - Personal Computer Hardware discussion List <[log in to unmask]>
Subject:
Re: IOMEGA 100 MB AND STAR XR1520
MIME-Version:
1.0
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset="iso-8859-1"
From:
Roberto Safora <[log in to unmask]>
Comments:
Routed through UUCP Mailserver, Mailcoach V2.25
Parts/Attachments:
text/plain (27 lines) 
Is an external iomega, the data cable goes from the parallel port of the PC
to the iomega and then the data cable of the printer goes from the output
parallel conector of the iomega to the printer. The way the iomega drawing
on the rear sugests.

----- Original Message -----
From: Joel M. Blackman <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, April 23, 2001 10:33 PM
Subject: Re: [PCBUILD] IOMEGA 100 MB AND STAR XR1520


> Is the Iomega and external one connected to the LPT port in front of the
> printer?  Is the printer connected to the LPT port using a passthrough
port
> on the Iomega drive?  If that is your setup you will have problems.  You
> need to get either another PCI LPT port card, or get a Belkin FU123-KIT
> multiple port IEEE1284 compliant box.  Most printer manufacturers
recommend
> against connecting their printers using passthrough ports.
>
> Subject: [PCBUILD] IOMEGA 100 MB AND STAR XR1520

                         PCBUILD's List Owners:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>

ATOM RSS1 RSS2