Well, I don't know but I don't think my setup has a choice of languages,
but all the channels that were programmed for the area were gone when I
got back from vacation, and that was what I had to reprogram.
On Tue, 22 May 2001, Mike Freeman wrote:
> If the power goes off, one has to reset things. However, the channel
> you're on etc. is retained in memory. The only thing you have to do is
> select ENGLISH as the language to display things in. You can
> effectively do the same thing by turning the set on, off and back on
> again and it works.
> Mike Freeman <[log in to unmask]>
> Amateur Radio: K 7 U I J
> ... Pushing 40 is exercise enough!
> ----- Original Message -----
> From: "JEFFREY MICHAEL KENYON" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, May 22, 2001 9:03 PM
> Subject: Re: modern tv's
>
>
> > Do you have to reset it every once in a while with channel programming
> if
> > say the power goes out? I don't know how much it will apply to you
> but at
> > school when mine would get unplugged because of holidays I'd have to
> reset
> > it and it was because of the channels. At first someone helped me,
> but
> > the second time I had to do it I just decided on trial and error and
> it
> > worked.
> >
> >
> >
> >
> >
> > On Tue, 22 May 2001, Mike Freeman wrote:
> >
> > > I can do the usual things that one does with a TV -- select channel,
> > > change volume, etc. and I can record on the VCR though can't always
> tell
> > > what speed the thing is going to record at. What I cannot do is
> program
> > > the VCR.
> > > Mike Freeman <[log in to unmask]>
> > > Amateur Radio: K 7 U I J
> > > ... Pushing 40 is exercise enough!
> > > ----- Original Message -----
> > > From: "JEFFREY MICHAEL KENYON" <[log in to unmask]>
> > > To: <[log in to unmask]>
> > > Sent: Tuesday, May 22, 2001 7:00 PM
> > > Subject: Re: modern tv's
> > >
> > >
> > > > What can you do with your menus then, and what problems are you
> having
> > > > with programming?
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > On Tue, 22 May 2001, Mike Freeman wrote:
> > > >
> > > > > Actually, I believe it's only the remote control that talks, not
> the
> > > TV
> > > > > itself. But that's a lot better than nothing. I have a Zenith
> TV
> > > with
> > > > > built-in VCR whose main features I can use even though it has
> menus
> > > and
> > > > > doesn't talk. But I can't program the derned thing!
> > > > >
> > > > > Mike Freeman <[log in to unmask]>
> > > > > Amateur Radio: < K 7 U I J >
> > > > > ... Pushing 40 is exercise enough!
> > > > >
> > > > > On Tue, 22 May 2001, Jody Ianuzzi wrote:
> > > > >
> > > > > > Harvey,
> > > > > >
> > > > > > Zenith makes a VCR with speech. Maybe Zenith makes a TV with
> > > speech
> > > > > > too.
> > > > > >
> > > > > > JODY
> > > > > >
> > > > >
> > > >
> > >
> >
>
|