Hi All:
Problem:
Five open PCI slots in new system, nothing else installed.
Installing Linksys LNE100TX 10/100 Lan Card
First adapter in this new system installs with memory address conflicting with PNP Bios extension
and I/O conflict. These I have been able to manually configure.
But it also shows in Device Manager device status:
Bios for the device did not give it an IRQ. (code 29).
Enable the device in BIOS or call the system manufacturer.
I have tried the four nonshared PCI slots. Tried forcing IRQ for each slot from BIOS with unused irqs with no
success. Each remove and install seems routine but each ends with yellow mark in device manager.
And I thought the first adapter would be the easiest!
Thanks
Bill Kapelas
System:
Athlon TBird 800 Mhz on Asus A7Z r 1.02 (without audio) Motherboard.
Promise ATA/100 IDE controller on MB.
Award Bios
300 watt AMD approved power supply.
Maxtor 20 gig 7200 RPM ATA/100 Hard Drive
Western Digital 10.2 gig 5400 RPM ATA/66 Hard drive.
80 IDE Conductor cable.
ATI Rage 128 AGP2 Video adapter.
56x IDE CDROM Drive.
Mag 786FD Monitor.
Win98 (not SE).
Curious about the people moderating your
messages? Visit our staff web site:
http://nospin.com/pc/staff.html