Subject: | |
From: | |
Reply To: | |
Date: | Mon, 24 Sep 2001 08:29:31 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have had a simular problem and What I had to do was install the
motherboard drivers. The drivers that came with the motherboard, then
everything was
seen and everything worked ok.
Larry
-----Original Message-----
From: Mike Buraczewski [mailto:[log in to unmask]]
Sent: Sunday, September 23, 2001 10:22 PM
To: [log in to unmask]
Subject: [PCBUILD] System will not boot
Hello to all listers
I have the most confusing problem I have ever encountered, and I am hoping
some one of you may be able to help.
I have a custom built machine. It originally was built with AOpen AZ33
motherboard, duron 900 mhz processor [assembled in Malasia], 256 mb ram, 20
gb hdd.
The machine worked fine for about a month. It absolutely will not boot.
The case and CPU fans run, but there is not post performed.
To date I have done the following:
Replaced the power supply. Replaced the motherboard [twice], replaced the
processor, replaced the ram, replaced the video card. I have tested the
memory and chip in other machines. They work well. I have put other CPUs
in this case, it won't boot.
I have carefully checked the mounting on the board. There are 9 holes in
the board with metal backing indicating they are mounting holes. Each of
them has a screw installed into a brass stand off.
I sure would like to hear some suggestions as to what to do with this
machine.
TIA
Mike Buraczewski
[log in to unmask]
PCBUILD maintains hundreds of useful files for download
visit our download web page at:
http://freepctech.com/downloads.shtml
PCBUILD maintains hundreds of useful files for download
visit our download web page at:
http://freepctech.com/downloads.shtml
|
|
|