Hi all,
I need the latest BIOS before upgrading my processor and want to be sure
I'm getting the procedure exactly right before flashing my Award BIOS on my
Abit BE6-II Motherboard rev. 1.01.
Question 1: Deciding which BIOS to use.
Currently installed BIOS: QJ
Updated BIOS: (See Below)
This is confusing (read below but you may want to see web page for what I'm
talking about) www.abit-usa.com downloads section.
Latest version supports 1Gig PIII --> Listed file name is UH but is
listed as RV and the downloaded file is RV.
Note: RV is the same label as two revisions ago. Odd!
I could go with SH (I don't need 1 Gig Support).
Question 2:
Can I just boot with a DOS floppy and run awdflash.exe without any command
line parameters?
(awdflash version 7.72 - latest)
I'm confused whether or not I need to use any parameters like given in
Abit's example.
i.e. awdflash beh_rv.bin /cc /cd /cp /py /sn /cks /r
I don't know what all those parameters do.
Thanks for any help,
Bill Nussbaumer
PCBUILD maintains hundreds of useful files for download
visit our download web page at:
http://nospin.com/pc/files.html