> From: Robert Turnbull <[log in to unmask]>
> I want to test the lead that is used by the power
> supply for the hard drive.
> I have a volt meter. If I put one probe of the volt meter into the socket
> hole that goes to a red wire, and the other probe into the socket hole that
> goes to the adjacent black wire (and the same for the yellow wire and the
> adjacent black wire) will this give me the voltage readings that I want?
Yes. With a good meter, the readings should be from 95 % to 105 % of rated
voltage. Work up to the scale that gives the best reading for accuracy.
> I don't want to short circuit the power supply (which may be on its last
> legs), but I do want to test it before replacing it. Is this the correct
> procedure?
It would be better to clip the (-), or black lead to the case of the power
supply. That way there is less risk of shorting the two probes together.
If your meter is a combination volt-ohmmeter or ammeter (VOM or
multimeter) make sure that the meter is set to "Voltmeter". Digital meters
tend to be more precise than analog.
> If anyone has an "Oh my god!" reaction to what I propose to do, please let
> me know.
That's the reaction if you try to measure voltage with the "Ammeter" setting.
Bang! Hope the fuse saved it. :-(
Boyd Ramsay
[log in to unmask]
PCBUILD maintains hundreds of useful files for download
visit our download web page at:
http://nospin.com/pc/files.html