overclock requires to take care of many issues. first, you must solve the
heat problem, you may also rise the core votage which will bring more heat
problem, if you overclock, your PCI card may not work since the extra FBS
may force PCI bus to run beyound spec. overclock may damage the CPU, if you
are not careful, the mobo could be destoried by heat too.
Unless you know what you are doing, don't overclock.

Jun Qian

----- Original Message -----
From: "Demetri Kolokotronis" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, September 20, 2000 5:20 AM
Subject: Re: [PCBUILD] Benchmarks


> Note: The Overclock jumper settings are for internal test only. Improper
> use may cause serious damage to your PC system."
>
> I think the BIOS multiplier setting will not work, unless setting is
> enabled in BIOS, AND JP18 is opened on board. Further, I think JP16 Speed
> Setting will not work, unless JP18 is opened on board. If I accept
> default settings, CPU clock ratio and speed setting are set
> automatically. This leaves me with what appears to be inadequate
> performance. Should I manually set CPU clock ratio and speed settings,
> ignoring "Note" above? If so, to what settings?

                  Visit our website regularly for FAQs,
               articles, how-to's, tech tips and much more
                  http://nospin.com - http://nospin.org