Subject: | |
From: | |
Reply To: | |
Date: | Fri, 19 Nov 1999 00:50:43 +1100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Can you double check if the CPU is in its position, I have seen many cases
that CPUs were loss connected. Just push the CPU a bit harder. If the CPU is
ok, check the RAM.
Jun Qian
Dharam Bhardwaj wrote:
> My first attempt at putting together a slot1 unit is less than positive.
>
> Parts: Abit Bh6, Celeron 300a, 128meg RAM, ATI video card, ATX case.
>
> Scenario: I am doing the initial test, where I have the board with the
> cpu, ram and video card in the case. the cpu fan is connected to the
> board. The 'power switch' wire is connected. No other wires or
> peripherals are connected. At power up, the case fan kicks in as
> expected, but that's it. The cpu doesn't boot and the monitor is blank.
The PCBUILD web site always needs good submissions. If
you would like to contribute to the website, send any
hardware tech tips or hardware reviews to:
[log in to unmask]
|
|
|