Thanks to all for the responses.
I'm just curious, you've suggested the cdrw as sec slave. I've seen
configurations in some PCs (with 1-HD and 1-cdrom only) where the HD is
Primary master and the CD-rom is secondary slave. What is the advantage of
making the CD sec slave?
Btw, I'll be using Adaptec sw with Win98se.
Thanks
Dan Kucherich
> Generally speaking, put the HD on the primary master,
> the CD-Rom on the secondary master,
> the CD-RW as the secondary slave.
>
> Turn off ultra ata 66 or 100 on the secondary port.
> (Or set it to Auto.)
>
> DMA on the secondary, and Auto Insert Notification is
> determined by the version of your burning software, if
> Roxio or Adaptec.
>
> Be careful to have a system back-up if putting Roxio v5
> on W2K, (there are special instructions and a critical
> 5.01 Roxio patch), and leave out TakeTwo (and DCD?).
> Rick Glazier
>
> ----- Original Message -----
> What would be the optimum configuration for 1-hard drive, 1-cdrom drive,
and 1-cdrw drive? Which should be primary slave, secondary
> master...etc. for optimum speed in copying/burning CDs?
>
> Visit our website regularly for FAQs,
> articles, how-to's, tech tips and much more
> http://freepctech.com
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://freepctech.com
|