Subject: | |
From: | |
Reply To: | |
Date: | Tue, 17 Apr 2001 15:23:29 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
First, I assume the wizard is finding the drivers for the printer on Nt
admin okay, and installing them. Second, I would rightclick on the printer
icon in the printers folder and go to properties, detail, and verify the
port. You can always try deleting the port and re-adding it. It sounds
like the port is not properly configured, except that in my experience, the
network printer icon eventually goes off-line if you send several jobs to it
while it is pointing to a bad or wrong port.
Tom Turak
-----Original Message-----
From: Steve Sills [mailto:[log in to unmask]]
Sent: Monday, April 16, 2001 11:59 AM
1. I have verified that the printer port path is correct - \\Nt_admin\hpnt.
2. I am not getting any error messages; the printer icon appears in the
system
tray and says that 1 document is pending and then goes away - but no test
page
prints.
3. I can see the printer from the NT Server and I am able to print a test
page
successfully.
Steve Sills
Mark Rode wrote:
> Check your port on the Win98 PC...is it pointing to the correct server
> printer port?
> Are you getting any error messages...if so what?
> Can you see the Win98 Printer in Network Neighborhood from the NT Server?
>
> At 07:09 PM 4/13/2001 -0500, you wrote:
> >I am adding a new Windows 98 SE desktop to our NT4 domain and I cannot
get
> >it connected to an HP 4000T LaserJet network printer. I have verified
the
> >network path and it is correct. There are 4 existing users that are
> >printing successfully to the printer. I am at my wits end. Any
> >suggestions? Thanks.
> >
PCBUILD's List Owners:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>
|
|
|