Subject: | |
From: | |
Reply To: | |
Date: | Fri, 14 Jul 2000 00:42:10 +0530 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have on my hands a MOBO with ALI-M5113 Chipset, Socket 7, Intel PCIset
SB82437VX (as on the Chip) Chipset and with "KBT5A-2" written on it &
with an AWARD Bios (no V. No.)
The board has 4 EDO Slots & 1SDRAM Slot, Non ATX Connectors, 4 ISA, 4
PCI Slots IDE Floppy & PS/2 Connector Slots. Also there are a couple of
GALVANTECH GVT7132C32Q-6 SMT Chips at the end of the AT MOBO with a
weird looking slot near the Socket 7.
Now, I have narrowed it down to the ESA P5TSVX-ATX Board or the P5TVX-AT
Board which from the Pix on the ESA site are remarkably similar except
that ther are TWO SDRAM SLOTS & have USB.
But Since they are NOT the same I am rather shaky about putting in a
PI233 Chip for I fear that the incorrect core voltage might fry the Chip
as I have no jumper details !
Could somebody tell me WHAT this board is and if I CAN put a 233 Chip in
the Board and if identifiable WHERE I could find jumper settings et al ?
INIGO
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://nospin.com/pc/pcbuild.html
|
|
|