Subject: | |
From: | |
Reply To: | |
Date: | Thu, 29 Mar 2001 23:44:09 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
There are two specifications, 568A and 568B.
The order of the cables is as follows:
white/orange
orange
white/green
blue
white/blue
green
white/brown
brown
This is how I do them but I just did a search and found all sorts of
combinations.
HTH,
Jose
Peter Shkabara wrote:
> I am not a cable guru, but it was my understanding that pins 1-2 3-6 4-5 7-8
> were the wire pairs. I also don't know if the wire colors are standard as to
> the pin assignment, but a wire pair consists of a color and the same color
> with a stripe. Modifying the list provided by Marv and adjusting it to the
> proper pin pairs would give us this:
>
> white & orange
> orange
> white & blue
> white & green
> green
> blue
> white & brown
> brown
>
> If my understanding is wrong, someone please correct me so I don't teach
> others the wrong way.
>
> Peter Shkabara, P.E.
> ____________________________
> Computer Science Instructor
> Columbia College - Sonora, CA
> 209 588-5156
> [log in to unmask]
> [log in to unmask]
> http://pesh.what.cc
> -----Original Message-----
> If this is a certified CAT5 cable (category 5) which has four twisted pairs
> of 24 gauge wire then from the wire insertion end with the connecting pins
> visible (up) the colors should be from left to right
>
> white & orange
> orange
> white & blue
> blue
> white & green
> green
> white & brown
> brown
>
> These connection are the same on both ends of the cable.
>
> Marv Trott
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml
|
|
|