Subject: | |
From: | |
Reply To: | |
Date: | Mon, 30 Aug 1999 18:43:06 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
At 05:01 PM 8/29/1999 +0300, you wrote:
>I just helpd a friend with setting the display for his computer.
>I wondered:
>instead of "refresh rates" he has:
>vertical frequency, and horizontal frequency.
>The vertical frequency is: 85Hz, which is the same as "refresh rate",
>As the resolution is 800x600, I gathered that as there are 600 lines
>along the vertical axis of the screen, and that thus
>horizontal frequency should be
>600x85Hz=51KHz,
>But the horizontal frequency is set to 53.6KHz, which is of the same
>order of magnitude but not the same.
>
>Why is that?
Uzi,
This is called 'overscan' The VESA specification calls for about 4%
overscan (a few lines above, and a few lines below the actuall image).
There is no data there (all black, or beam-off), so you don't see anything
above or below the 600 lines.
I am not sure why that is the case, but I would suppose it is to allow the
beam to stabilize after the big jump to the top. I know that doesn't apply
to the bottom, but that's all I've got.
HTH
J. Paul Jones
[log in to unmask]
http://www.mindspring.com/~jpjcet/
PCBUILD's List Owner's:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>
|
|
|