Subject: | |
From: | |
Reply To: | |
Date: | Mon, 12 Jun 2000 10:48:19 +1000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Setting for 233Mhz: 66 x 3.5
So, the DIP switch from 1 to 6 should be:
1 off, 2 off, 3 off, 4 on, 5 off, 6 on, and remember to ensure the CPU core
Voltage set to 2.8v (sometimes overclocking requires increase CPU core voltage).
I hope the CPU is still good, if it has been running in hot (overclocking)
without properly cooled, it might be burned out already.
Good luck
Jun Qian
Bassem Fahmy wrote:
> Ulta you was right it was overclocked because when i put 233 and push the
> box in the motherboard to make it 233 it enter the win98 successful but it
> hangs, and when i touch the cpu after closing the computer in harry i found
> it very very hot..
> now i need you to tell me the correct setting for the cpu depinding on this
> information:
> - i found in the back of the cpu that its 2.8 v
> and in the mother board ther are 2 tables :
> the first..
> 1 2 3
> off off off 1.5
> on off off 2.0
> on on off 2.5
> off on off 3.0
> off off off 3.5
> on off on 4.0
> on on on 4.5
>
> The second table:
> 4 5 6
> on on on 50 mhz
> off on on 55 mhz
> on on off 60 mhz
> on off on 66.5 mhz
> off on off 75 mhz
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://nospin.com
|
|
|