Subject: | |
From: | |
Reply To: | |
Date: | Thu, 4 May 2000 10:48:32 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
One other thing to consider is that not all K6-2's can run at 100MhZ. I
found this out myself when I ordered some and found out they are supposed to
run at 66 MhZ. Some of them I can get running at 100 and others won't even
post at that speed. The chip itself should be labelled. I will admit the
chips I had that issue with were 300's, so I'm not sure if the 333 is the
same way.
----- Original Message -----
From: "Troy Havard" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, May 03, 2000 9:04 PM
Subject: [PCBUILD] Bus Speed problem
> I have a customer who has a problem I can't quite figure out. He is
running a
> Tekram mobo w/ K6-2/333 proc currently @ 66 MHz FSB and wants to up the
FSB to
> 75 or 83 MHz (max of the mobo). He has PC100 DIMM. When he attempts to
up FSB
> to 83 MHz, system will not even boot. If he puts it at 75 MHz, it will
boot,
> but slooooowwwlly, and doesn't run apps hardly, if at all. Any
suggestions? As
> I understand it, all the K6-2's are 100 MHz FSB, and if RAM is there also,
why
> wouldn't system work w/ mobo at only 83 or 75?
>
> Visit our website regularly for FAQs,
> articles, how-to's, tech tips and much more
> http://nospin.com - http://nospin.org
>
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://nospin.com/pc/pcbuild.html
|
|
|