Subject: | |
From: | |
Reply To: | |
Date: | Sun, 13 Feb 2000 16:38:37 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
How are the drives on the primary controller and the Maxter configured, i.e.
WRT fdisk. Are they primary partitions, combinations of primary and logical
and/or logical only?
Daniel Wysocki
Twin*.*Star Computers
770-498-2582 / 800-816-0663
[log in to unmask]
Fast - Reliable - Wallet Friendly
>-----Original Message-----
>From: Ben Moore <[log in to unmask]>
>in the first post on this.
>>I've copied the original below as info. The Maxtor drive that I'm trying
>to
>>add to the secondary ide controller will not run in anything but dos
>>compatibility mode even when it is the only device on the controller.
This
>>drive is assuming the designation "E" which was the zip drive. I have no
>>entries in the config.sys that would be loading some weird driver for this
>>drive letter. I've checked the registry for a NOIDE entry. There was
none
>>present. The drive works correctly on the primary controller. As I said
>>earlier, CD and zip work correctly on the secondary. Is there someplace
>I'm
>>not looking where some file is loading incorrect drivers for this device?
>>
>>Here's the original:
>>
>>I'm having a problem adding a hard drive to my PIII 450, Win98SE, Abit
>>BX6-2. I have 2 hard drives on the primary IDE controller and an A-open
>32x
>>CD as master and a Zip as slave on the secondary. I want to add an 8 GB
>>Maxtor drive to the secondary controller in place of the zip. I removed
>the
>>zip and just replaced it with the hard drive as a slave to the CD. The
>bios
>>recognizes everything correctly but in Win 98 I have no CD at all in
>>explorer or system properties and a yellow exclamation mark on the
>secondary
>>IDE controller showing that it's not working. No conflicts are shown.
>Only
>>two hard drives are listed in system properties but I can access the new
>>drive, E, which apparently is running in dos compatibility mode. I
>changed
>>the jumpers on both the hard drive and the CD making the hard drive master
>>and the Cd slave. Still the same thing. I removed the main bus master
>>controller and let the system reinstall all the controllers. Same
problem.
>>Of course, if I put the zip back in all is well.
>
> PCBUILD mailing list is brought to you by:
> The NOSPIN Group
> http://nospin.com - http://nospin.org
PCBUILD mailing list is brought to you by:
The NOSPIN Group
http://nospin.com - http://nospin.org
|
|
|