David,

You may be out of luck.  I have used several Pentium and Pentium MMX boards
that have a maximum DIMM size of 32MB to 64MB, and I even have one board
that will not accept anything larger than a 16MB DIMM.  The ironic part of
this is the fact that I am using two 32MB SIMMs in this machine.  It has
four SIMM slots and one DIMM slot, but will only take 16MB in the DIMM.  Go
figure.

Anyway, the best way to check is to hook up the video, CPU, and sequentially
throw in a 128MB, 64MB, and 32MB DIMM.  It is possible you will only be able
to use 32MB or 64MB at one time.  Then again, you may get lucky.  Hope this
helps.

Kyle


>From: "David Brenner, Ph.D." <[log in to unmask]>
>Subject: [PCBUILD] Memory for Intel PR440FX Motherboard
>Date: Thu, 4 Nov 1999 13:03:01 -0700
>
>To All:
>
>Just picked up a New (old) PR440FX Intel dual PPro motherboard w/ CPU's,

<<snip>>

>Anyway....
>
>I am currently searching for memory (3.3 v Buffered ECC EDO DIMMS). I went
>to the Intel WEB Site and am trying to figure out If I can install 1x 128mb
>DIMM or If I need 2x64mb DIMM's. The info on the WEB Site says 2x64 will
>work, but shows only a single 16mb DIMM as one of the possible memory
>configurations. Does this mean that a single 128 Mb DIMM is a valid memory
>configuration for this board? I ask because 2x64 will cost at least $20
>more
>than 1x128.
>
>Any help is greatly appreciated. TIA
>
>cheers,
>
>db

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>