Mime-Version: |
1.0 |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Tue, 1 Aug 2000 17:25:16 GMT |
Content-Type: |
text/plain; format=flowed |
Reply-To: |
|
Parts/Attachments: |
|
|
You wrote===I just switched off the computer and when I switched it on the
next day it would not start. I don't know if anyone did anything to it while
I was away.==
Remove all peripherals [cards, cables, connections to hd and floppies
[[first the power connections then the 'ribbon']] piece by piece, switching
the machine on and off with each removal. When everything is out and you
still don't have a start, check the power output of transformer [see other
earlier post for directions or voltages]. If no voltage, it's your
transformer, if you have voltage and the connectors to the mobo from the
transformer are correct [I'm not sure but I think there should be matching
colors at the center of the two connectors-I recall they are black], it is
likely a motherboard problem, but I would be conservative in making this
final conclusion until I had taken everything out and put it all back from
scratch. In my experience a lot of unncessary parts are replaced in this
day of easy swap in and out.
AM
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://nospin.com - http://nospin.org
|
|
|