Irena Thomas <[log in to unmask]> wrote:
> Thanks, Jun. Related question: what is the best sequence of populating
> primary & secondary channels with HD, CD-ROM, zip and LS120 ? Which should
> be on primary ? Which should be set as masters ?

The HD's should always be master, removeable drives should be secondary if there
are no master positions available (occupied by HD's). If you have one HD on
primary master, put the CDROM as secondary master. If you have two HD's, put the
CDROM as secondary slave. If you have an LS120, I would put that on primary
slave. The idea is generally to avoid having anything as slave on the primary
channel since that is the most used disk, if you have to, put the slower, less
frequently used device on primary slave (LS120 or ZIP).


--
Russ Poffenberger               Engineering Specialist
Schlumberger Technologies ATE   DOMAIN: [log in to unmask]
1601 Technology Drive
San Jose, Ca. 95110             Voice: (408)437-5254  FAX: (408)437-5246

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                    http://nospin.com/pc/pcbuild.html