Greetings-- -----Original Message----- From: ehundrieser <[log in to unmask]> >Here is a abbreviated rundown of the SYSTEM.INI files: > > [386Enh] > ebios=*ebios > woafont=dosapp.fon > mouse=*vmouse, mamouse.vxd > device=*dynapage > device=motvcd.vxd > device=*vpd > device=*int13 > COM2FIFO=1 > device=*vcd > device=*enable > PagingFile=C:\WINDOWS\WIN386.SWP > deyboard=*vkd > displays=*vdd,vflatd > >Your instruction says to 'REM the line out'. I'm assuming the line you're >referring to is: > > device=*vcd > >Is REM as in REMOVE? It is REM as in remove, but it is done in the .ini file by placing a ; in the first position on the line. > I'm a bit cautious if I'm treading on unfamiliar ground! >If correct, would I just delete that line from the above section and reboot? Do not delete the line just yet, but reboot after placing a ; at the beginning of the line. The error message may be eliminated by this simple expedient. Be observant of your computers general 'behavior'. If all seems well, you could remove the line entirely, though it does no harm to leave it in place (especially if you find you must "put it back"). >What has me puzzled - I don't see a duplicate reference to vcd other than >device=motvcd.vxd . The vcd may be loaded from the registry. HTH, Paul A. Shippert Library/Media Specialist "There is no dark side of the moon really . . . matter of fact, it's all dark." Pink Floyd [log in to unmask] PCSOFT mailing list is brought to you by: The NOSPIN Group http://nospin.com