James Maki wrote: > > Hi, > > Last year I put together a computer using an FIC PA-2007 mobo and 200 > MHz AMD K6 CPU. So the question is, has anyone > successfully mated the PA-2007 mobo with the 266 or 300 MHz AMD chip > (not the new 3D enhanced version, just the MMX version)? > > Second question, has anyone successfully overclocked the AMD K6 200? I > tried upping the internal multiplier (would start to boot but then > strange things happened to the display) and the bus speed (to 75 MHz > -- nothing at all). > Jim Maki > [log in to unmask] Jim, I have used the AMD 266 with the FIC board for several clients. Don't seem to have any more problems than with AMD approved boards. But then again, I seem to have more problems than usual with the 266 regardless of the board. It seems to be very picky about memory. As for overclocking the 200 I run it on my personal machine at 75x3 (225) on a Epox P55TV2 board and it runs like a champ. (Note: Advise on overclocking is my own and does not represent a suggestion from Customer Resource Computers.) -- Jim Purcell Customer Resource Computers phone: (405) 692-2074 fax: (405) 691-8389 mailto:[log in to unmask] http://www.telepath.com/crc Buy what you need; not what a salesman needs to sell.