Chris, I think the Th-f6a may have the same DTMF codes in the manual. you can find the manual at http://www.icanworkthisthing.com Fred Olver n9bso ----- Original Message ----- From: "Chris Schulte" <[log in to unmask]> To: <[log in to unmask]> Sent: Sunday, December 16, 2007 1:51 PM Subject: Re: sky command codes in text format > No, I don't have the html stuff from this list, is there a link that you > could quick pass along to me? > 73, > Chris, w8cjs > ----- Original Message ----- > From: "Butch Bussen" <[log in to unmask]> > To: <[log in to unmask]> > Sent: Sunday, December 16, 2007 12:18 PM > Subject: Re: sky command codes in text format > > >> It is in the manual, I'll have to look when I get back to Vegas. This >> is not the same as sky command. This is wireless remote, not the same >> thing at all. I think perhaps this is what is causing some confusion. >> If you have the html manual that was put up on this list, wireless stuff >> is in there. >> 73s >> Butch Bussen >> wa0vjr >> >> On Sat, 15 Dec 2007, Chris Schulte wrote: >> >>> That's what I'm looking for, the dtmf codes to remotely control the >>> radio. >>> I know a friend that has a v7 and he uses his hand held to control it >>> remotely using dtmf codes, I was hoping that someone on this list would >>> know >>> how to do the same thing with the 71. I looked in the manual, and >>> there's >>> really not a lot on how to do that. Thnaks and 73, >>> Chris, w8cjs >>> ----- Original Message ----- >>> From: "Colin McDonald" <[log in to unmask]> >>> To: <[log in to unmask]> >>> Sent: Friday, December 14, 2007 11:13 PM >>> Subject: Re: sky command codes in text format >>> >>> >>>> I don't think the v71 has a built in tnc. >>>> though i may be wrong. >>>> the d7a has a built in tnc and dual band tx and rx capabilities. >>>> the only other radio that kenwood makes that can be used with sky >>>> command >>>> and the ts2000 is the tm D700. >>>> However, if the v71 is anything like the v7a, or the d700 or the >>>> ts2000, >>>> they can all be controled on a very limited basis with dtmf codes. >>>> I haven't looked in a long time, and I haven't used the feature in a >>>> long >>>> time, but I know you can control certain functions remotely by using >>>> the >>>> dtmf codes for the ts2000 and the v7a...not sure about the v71. >>>> 73 >>>> Colin, V A6BKX >>>> ----- Original Message ----- >>>> From: "Chris Schulte" <[log in to unmask]> >>>> To: <[log in to unmask]> >>>> Sent: Friday, December 14, 2007 9:04 PM >>>> Subject: Re: sky command codes in text format >>>> >>>> >>>>> So then I need a tnc for both the th7 and v71? For that matter, I >>>>> need >>>> one >>>>> or both rigs hooked to a computer? I just want to know how it's all >>>>> going >>>>> to work. If I have to get the th7, that's not a problem, heck, it's >>>>> actually cheapper. >>>>> >>>>> ----- Original Message ----- >>>>> From: "Anthony Vece" <[log in to unmask]> >>>>> To: <[log in to unmask]> >>>>> Sent: Friday, December 14, 2007 10:49 PM >>>>> Subject: Re: sky command codes in text format >>>>> >>>>> >>>>>> Hi Chris; >>>>>> >>>>>> The F6A will not do what you want it to do. >>>>>> >>>>>> The Sky Command control codes are transmitted with a TNC. >>>>>> >>>>>> They are not transmitted with touchtones and or DTMF tones. >>>>>> >>>>>> The handheld that will work is the TH-D7A. >>>>>> >>>>>> The D7A has a built-in TNC. >>>>>> >>>>>> 73 De Anthony W2AJV >>>>>> [log in to unmask] >>>>>> ECHOLINK NODE NUMBER: 74389 >>>>>> >>>>>> ----- Original Message ----- >>>>>> From: "Chris Schulte" <[log in to unmask]> >>>>>> To: <[log in to unmask]> >>>>>> Sent: Friday, December 14, 2007 5:06 PM >>>>>> Subject: sky command codes in text format >>>>>> >>>>>> >>>>>>> Ok, I'm not sure if Kenwood calls it sky command, or sky commander, >>>>>>> and >>>> = >>>>>>> being as how I'm too lazy to look in my tmv--71 manual or my ts-2000 >>>>>>> = >>>>>>> manual for the exact name of it, I figured if I made a mistake, I'd >>>>>>> be >>>> = >>>>>>> forgiven. =20 >>>>>>> >>>>>>> Anyway, does anyone have the control codes for sky command in a text >>>>>>> = >>>>>>> format that is readable? I was looking at it in my tmv-71 manual a >>>>>>> few >>>> = >>>>>>> days ago, and I can't for the life of me read or understand that >>>>>>> table >>>> = >>>>>>> that is in there. =20 >>>>>>> >>>>>>> I'm going to be purchasing the THF6A in late january, and want to be >>>>>>> = >>>>>>> able to use it to remotely control the 71a. Thanks for any help, >>>>>>> Chris, w8cjs >>>>>>> >>>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> No virus found in this incoming message. >>>>> Checked by AVG Free Edition. >>>>> Version: 7.5.503 / Virus Database: 269.17.2/1184 - Release Date: >>>> 12/14/2007 11:29 AM >>>>> >>>>> >>>> >>> >> >