Clyde W. Burns writes:- <<< Ireplaced the cmos battery and brought up the set up menu and set the bios to default settings, exited the menu and got a both input signals missing error and then computer specs and at the bottom, disk error 1/0 replace disk hit any key. I tried starting it with a windows 95 boot disk but same thing>>> Hi, assuming that you have set up to boot from floppy (the default settings referred by you is the same) and you are still getting " disk error", the only logical conclusion is the floppy drive is bad. the best course IMHO is to see if you can borrow a floppy drive and replace it in the system and see if any joy results. on a side note floppy drives are dead cheap, but why pay even that, till you are sure of the causes. good luck----Venkat PCBUILD's List Owners: Bob Wright<[log in to unmask]> Drew Dunn<[log in to unmask]>