Hi John and list; I eventually figured it out. I had the correct offset set but I thought that the offset direction would be automatic based on the frequency. Once I manually checked plus or minus things worked out. I hadn't needed to use that software in quite some time but although there were some adventures it is certainly easier than doing each frequency manually. Somehow I managed to disable the cw read out and tv channels. After some investigation both are now working but no idea how that happened. 73 Richard ----- Original Message ----- From: "John Miller" <[log in to unmask]> To: <[log in to unmask]> Sent: Wednesday, April 11, 2007 5:18 PM Subject: Re: ict90 Do you have the right offset? not just plus or minus, but the right step site for the offset? ----- Original Message ----- From: "Richard Fiorello" <[log in to unmask]> To: <[log in to unmask]> Sent: Wednesday, April 11, 2007 6:59 PM Subject: ict90 > Hi; > The good news is that for unknown reasons the software is now letting me > put > in and copy all the frequencies I want. The bad news is that I don't seem > to be hearing anything or hitting any repeaters. I have put in the "pl" > tone and checked the tone box. The attenuator is not checked and it is on > high power. I obviously changed some other setting that is causing a real > problem. Under view I was looking under "common setting" and I suspect > that > may be a place to avoid. > Any ideas will be happily received. > Richard