I need to make a correction my previously appended statement. If you wish to isolate the LAN from the WAP then you will need three routers setup like this. WAN plugged into the modem through the WAN port 192.168.3.x 255.255.255.0 LAN plugged into the WAN from the WAN port 192.168.1.x 255.255.255.0 WAP plugged into the WAN from the WAN port 192.168.2.x 255.255.255.0 Two will not do it because when you plug into the WAN you will be behind it's firewall. But two routers plugged into the WAN, will each have their own firewalls that will isolate them from each other. Rode The NOSPIN Group http://www.freepctech.com/rode/ >If you want to isolate your wireless router from your LAN, then >assign the new router a separate IP address and plug the new router >into a LAN port of the Internet router, but to the WAN port of the >new router. Then you will have Internet access to the new router but >the new router's firewall will keep things separated. > >Before you try this, make sure you are using the latest BIOS >available for your particular router. The NOSPIN Group is now offering Free PC Tech support at our newest website: http://freepctech.com