Hi Chris: I too have a tm-g707 and can give you some technical advice. To enter a frequency on the tm-g707: 1. Press the VFO key on your microphone. The VFO key is on the top row of buttons and is the second button from the left. If you're using a speech synthesizer, you should hear it say, "VFO." 2. Press the A key to the right of the 3. Your speech module should say "Enter." 3. Enter the frequency you want. For example, if you want 147.32, you would enter: 4, 7, 3, 2, 0. Pressing the PTT button cancels your command. The high beep you heard could indicate an error or a cancellation of your command. I hope this helps. Eric ----- Original Message ----- From: "Kris Hickerson" <[log in to unmask]> To: <[log in to unmask]> Sent: Tuesday, June 13, 2006 5:29 AM Subject: TMG707a > Hi All, > > Ok, what am I doing wrong? I'm trying to enter a frequency in the 707 and > when I do and press the PTT button it just give a high beep, which I believe > is an error beep. I'm pressing pound for enter before entering the > frequency but no matter what I try I can't get it to take it. I've never > had this problem before. I'm sure I'm doing something stupid but I just > don't know what. > > Thanks for any help. > > Kris > wb9slm >