Thank you for your help with opening the box. Should I lay it on its side or having it standing up a la tower?? I assume I use a Phillips head screwdriver?? Christine -----Original Message----- From: PCBUILD - Personal Computer Hardware discussion List [mailto:[log in to unmask]]On Behalf Of Bob Zuccarello Sent: Sunday, May 18, 2003 8:47 PM To: [log in to unmask] Subject: Re: [PCBUILD] opening the "box" First, go to the store and get youself a can(s) of compressed air. Then, turn the computer off and undo the power cord. Take the screws off from the back and remove the sides. Next, blow the various boards and the components inside the computer with a stream of air. Make sure you get the fans. Do NOT blow air inside your floppy or cd-rom drives (they have special kits to clean them). You can use a very soft brush on the boards if you desire after blowing them off with the air. Remove all the cob-webs, hair balls and othe extraneous matter. Put the sides on, replace the screws and turn it back on. You are done. Not too bad was it. ----- Original Message ----- From: "Christine Gray" <[log in to unmask]> To: <[log in to unmask]> Sent: Sunday, May 18, 2003 2:20 PM Subject: Re: [PCBUILD] opening the "box" > I have been using a computer for years but have never opened it. I'm > intimidated!!! > > I know it needs to be cleaned because it's sat on the floor for about three > years and I have a dog that sheds. > > I could take it to a computer repair business to clean the inside, but I > thought maybe I should try to clean it myself. > > Is opening and cleaning the inside of the computer risky for a first-timer? > > How does "one" clean the inside? What materials do I need? > > Christine in Baltimore > > The NOSPIN Group provides a monthly newsletter with great > tips, information and ideas: NOSPIN-L, The NOSPIN Magazine > Visit our web site to signup: http://freepctech.com > The NOSPIN Group provides a monthly newsletter with great tips, information and ideas: NOSPIN-L, The NOSPIN Magazine Visit our web site to signup: http://freepctech.com PCBUILD maintains hundreds of useful files for download visit our download web page at: http://freepctech.com/downloads.shtml