Mario Genzone
[log in to unmask]

I installed two (matched pair)32K EDO modules = 64K in my PT -2003 m/b in bank 0 , but my systems post screen is only reporting 32K . Bank 1 is left empty. If I put 1 module in bank 0 and 1 in bank 1 it just gives error beeping, if I just install 1 module in bank 0 slot 1, it will give me beeps also. According to the manufacter (Fic) the m/b  has to have two 32k in bank 0 and none in bank 1 for 64k

I first purchased two other 32k each modules from an Ebay memory seller that indeed reported 64K on the post screen, but system did not boot, and  a error message said "memory fail" I guess one of them was bad, so he sent me these two matched pair replacments modules (but a different make)and like the first two they are labled 32K EDO each, but only have two large chips and a
few tiny chips on each stick. Where can I look up the mumbers on the chips to see if they are indeed 32k memory sticks and not 16k each. Just to see if they are labeled wrong and are only 16k sticks.

         PCBUILD maintains hundreds of useful files for download
                     visit our download web page at:
                  http://freepctech.com/downloads.shtml