Date: March 30, 2001 Subject: Zoom 2925 M modem with new AMD unit I recently built a new unit with a FC azIIe motherboard & a 1 Ghz AMD processor with WIN 98 SE. My problem is the zoom 2925M PCI 56K modem. I have installed the 4in1 patches from VIA. I have installed the newest zoom modem install files. The modem is on its own com port & IRQ with no conflicts at all. The modem returns normal data when communicating. The phone line is installed in the line port! I attempt to dial. There is no dialtone. I force it to dial but phone line says if you attempting to dial please try again. I put the modem back into the older pII 350 with same lines. The modem works fine. ISP says I am configured ok. I have a TCP/Ip with the dialer. I think either VIA or Zoom drivers are at fault? I have install the Modem as Zoom Spec. required. The drivers first then the modem itself. I have uninstalled all modem stuff. Put in Zoom newest modem driver first then reinstall the modem and let Win 98 install the modem. Does anybody have this problem? Any suggestions? Anybody with a FC AZIIE Motherboard with a 56K Modem. What 56K modem are you using ? Maybe I will just get a new modem. Thanks in advance Richard Bolha [log in to unmask] The NOSPIN Group is now offering Free PC Tech support at our newest website: http://freepctech.com