I still dont understand,can this be done with the hardware solution rather than a software one. >From: Kyle Elmblade This is not always the case. There were drives that >were made that had a >2.1G limit jumper setting. This told the IDE board on the drive to report >a >2.1G geometry to the BIOS so the overlay program wasn't needed. My original info.... Is it possible to move this harddrive to a new >controller > > card > > > and change the jumper settings to take advantage of the full size of >the > > > hdd without destroying my operating sys. I only have a Rescue disk and > > matching > > > floppy to use. I am going to be adding a new Hdd -bigger- later on and > > would like a hardware workaround for the bios instead of overlay >software >. > > Would this new card be able to help me with my current Hdd or is it to >late. > > It is Fat32 with the newest bios update they had . Sorry for any >incorrect > > info. Thanks from ray. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com Visit our website regularly for FAQs, articles, how-to's, tech tips and much more http://nospin.com - http://nospin.org