We have Windows 2000, and it wont let us get in bios mode. Here's what we did today On Saturday, 9/2/00, bought a PIII 550 to install on our ABIT BH6 MB (version 1.01 / 1.0A) 1.01 from the sticker on the board, 1.0A from the start up screen. This is a system bought in 1998, and have continued to upgrade. Problem #1: downloaded the flash program and the BIOS file ( think) we need (BH6LH.EXE) I read all the instructions and tried every trick I can think of. How do I know if that is the correct file? How do I install it? The instructions say that I must boot from "pure DOS" which I can't seem to do with my operating system. I created a rescue disk, but I still cannot boot from (DOS). Problem #2: My modem (US Robotics V90 56K voice Int.) is on com port #4. After trying to get my BIOS to recognize the new processor, the computer did not allow me to use the modem. Port 2 and Port 4 were both enabled, which created a conflict. I deleted com 2 from the device manager which allowed the modem to work again, but as soon as I re-boot, port 2 is re-installed, re-creating the conflict. How can I fix this one? Thank you in advance, Butch & Patti Gates The NOSPIN Group provides a monthly newsletter with great tips, information and ideas: NOSPIN-L, The NOSPIN Magazine Visit our web site to signup: http://nospin.com