At 06:51 PM 16/08/00 -0400, you wrote: >Old Zenith Z-Station 500, 486 DX 66. >Had Win98 Loaded and was tweaking the Win98 Settings (why I don't >know!). I think I changed something to do with Bios and 16 bit in the PCI >bus (System Area). After that, nothing. When powing up, keyboard flashes >once and hd spins up but not even a beep out of the machine. I took out >back pair of simms to make the Bios config menu come up but even that >doesn't happen. Any sugestions on how to bring it back to life for the >kids please? Have a look at the Motherboard manual (if you have one..otherwise you'll have to find a website with the information you need) and locate the BIOS reset jumper - this will probably fix it. Change the jumper to reset, turn the computer on then off after about 5-10 seconds, change the jumper back and see what happens. ------------------------------------------------------------------------------------------------------------------------------------- Paul Duthie [log in to unmask] Network Manager [log in to unmask] Ballarat High School [log in to unmask] ------------------------------------------------------------------------------------------------------------------------------------- Visit our website regularly for FAQs, articles, how-to's, tech tips and much more http://nospin.com - http://nospin.org