Error - template LAYOUT-DATA-WRAPPER not found

A configuration error was detected in the CGI script; the LAYOUT-DATA-WRAPPER template could not be found.

Error - template STYLE-SHEET not found

A configuration error was detected in the CGI script; the STYLE-SHEET template could not be found.

Error - template SUB-TOP-BANNER not found

A configuration error was detected in the CGI script; the SUB-TOP-BANNER template could not be found.
Subject:
From:
Ed Nelson <[log in to unmask]>
Reply To:
PCSOFT - Personal Computer software discussion list <[log in to unmask]>
Date:
Sat, 24 Jul 1999 17:41:39 -0500
Content-Type:
TEXT/PLAIN
Parts/Attachments:
TEXT/PLAIN (63 lines)
I'm afraid this will be long, in the effort to help your diagnostic efforts.
On cold boot (with DOS 6.2), immediately after the note to the effect:
HIMEM is testing extended memory ... done     I get the following 2 lines--

Bad or missing ANSI.SYS
Error in CONFIG.SYS line 4

but the boot operation now seems to continue without obvious problems.
The following screen traffic does seem a little ominous, however--

USDrive IDE BUS CD-ROM Device Driver Version 1.97
Unit 0   Base Address 170   Drive 0  Device version = ATAPI CDROM 1.70
Using 32 bits access

Device Driver Name = CD003
CD-ROM device driver installed
Bad command or file name
MSCDEX Version 2.23
Copyright (C) Microsoft Corp 1986-1993.  All rights reserved
        Drive E: = Driver CD003 unit )
575296 bytes free memory
0      bytes expanded memory
12948  bytes CODE
2112   bytes static DATA
20882  bytes dynamic DATA
36208  bytes used

C:\

My copy of ANSI.SYS is in C:\DOS
My CONFIG.SYS file reads--

DEVICE=C:     <Good Lord--I forgot to copy the 1`st three lines!>
DEVICE=C:
DEVICE=C:
DEVICEHIGH=ANSI.SYS
BUFFERS=20
FILES=40
BREAK=ON
DOS=HIGH, UMB

REM ===== USDrive IDE BUS CD-ROM Install Modification - Begin =====
DEVICE=C:\CDROMDRV\USDIDE.SYS /D:CD003
REM ===== USDdive IDE BUS CD-ROM Install Modification - End =====

-=-=-=-=-=-=-=-

Of the amazing bunch at PCSOFT, can anyone draw from the above any
useful information?  I've had trouble from time to time, but almost
everything seems to run OK right now.  There is the fact that the
ROM drive drawer won't close.  That's a problem, of course, but
otherwise all seems OK.  I once noticed the CPU fan had stopped, but
on cold boot it started again and has been running fine.  Other
problems have, for the moment, abated.                      --ed


[log in to unmask] // [log in to unmask]

         The PCSOFT web site always needs good submissions.  If
          you would like to contribute to the website, send any
               software tech tips or software reviews to:
                           [log in to unmask]

ATOM RSS1 RSS2

LISTSERV.ICORS.ORG Secured by F-Secure Anti-Virus CataList Email List Search Powered by LISTSERV