here is a help hint for for people using the asus a7v133 and i am sure other
brands also but here is the deal if you turn on the fan detection in cmos
and do not use a 3 wire fan with the yellow thermal sensor it will not boot
up
not at all completely black i cleared cmos and everything finally i figured
it out
just take another fan that has 3 wire and plug it on to mother board and it
will boot up then turn off the fan detection settings,so what i found out
was when you reset the cmos the default is on for fan detection instead of
off.
but in my case it was harder to figure out my fan was running properly
but the thermal sensor in the fan was bad.replaced bam!!!! booted up
then turned off fan detection in cmos.
just thought this would help some people..
kenny meadows
meadows electronics
[log in to unmask]
----- Original Message -----
To: <[log in to unmask]>
Sent: Thursday, January 10, 2002 5:53 PM
Subject: Re: [PCSOFT] Attachment in OE
The NOSPIN Group is now offering Free PC Tech
support at our newest website:
http://freepctech.com
|