The instructions that came with my computer (as well as my electronic engineer husband) said, for maintenance, to turn it off, but leave it plugged in, and then ground yourself to the steel (not the aluminum) to protect the electronics from damage.  You don't have to ground yourself to the PC; you can ground yourself elsewhere, but the computer itself must be grounded.  All computers have a grounded (three-prong) plug that carries static electricity "to ground."  If you put a static charge into an ungrounded computer, the charge is likely to go into the memory or other electronic part, rather than be harmlessly discharged through the ground wire.  

This is for maintenance - replacing things or cleaning.  When you BUILD a computer, you have to have/keep everything on anti-static mats and be VERY careful to ground yourself elsewhere with a strap, because you have no ground for static electricity until you have enough put together to plug it in and ground it, being sure to TURN IT OFF.  The "turn it off" part is very important. 

You could ground yourself elsewhere for maintenance, but that does not ground the computer and you are not the only source of electrostatic charges.  Vacuums and all sorts of things transmit electrostatic charge.

--AnnaSummers


----- Original Message ----- 
From: Lewis C. Emerson
To: [log in to unmask]
Sent: Friday, June 12, 2009 12:18 PM
Subject: Re: [PCSOFT] Virtual Memory Query


One more comment.  I had thought touching the case grounded you only if the case itself is grounded and that ground is made through the power cord.  So should not the power cord be inserted in the wall socket - with the computer OFF of course.   --Doc

      "Hold No Punches.." Rode brings you great shareware/freeware
        programs with his honest opinions in this weekly column.
                       http://freepctech.com/rode