Jim,
I've checked the /D extensions to make sure they correspond and they do.
The exact message I receive when I boot up is this:
C:\SBCD\DRV\MSCD.EXE /D:\MSCD001 / M:8 /V
"Device driver not found. No valid CD rom device driver selected."
This message is very strange because the disk I loaded the drivers from is
the Creative cd installation disk.
At 02:01 PM 1/20/99 -0500, Jim Meagher wrote:
>Dave,
>
>If you are absolutely positively sure that you spelled the D:/xxxxxxx
>exactly the same in both statements.......then the problem is with the
>DEVICE= statement in the config.sys file.
>
>Either the driver itself is the wrong one or bad -- recopy it to the hard
>drive or download
>the universal driver from our web site www.nospin.com
>OR
>You do not have the IRQ and/or I/O addresses set correctly. Different
>drivers use different formats for this. The SBIDE.SYS uses /P:xxx,yy
>(xxx= the I/O address yy=IRQ address)
>
Do you want to signoff PCSOFT or just change to
Digest mode - visit our web site:
http://nospin.com/pc/pcsoft.html
|