It *may* work.  A 133MHz front side bus really needs 133MHz memory, but
sometimes the 100MHz memory will work OK at faster speeds.  You probably
won't damage the DIMM by running it fast, but if it doesn't work, you'll
notice odd behavior from your computer.

Drew Dunn

-----Original Message-----
From: PCBUILD - Personal Computer Hardware discussion List
[mailto:[log in to unmask]]On Behalf Of Jay Merritt
Sent: Tuesday, November 23, 1999 2:03 PM
To: [log in to unmask]
Subject: [PCBUILD] 133MHZ Combination?


I just purchased the following items to build a PC with. They are as
follows:
Motherboard: Abit BE-6 II
CPU ----------: Pentium III 600B/133MHZ FSB
Ram ----------: 128MB PC100
I am wanting to set the FSB speed on the motherboard to 133MHZ.
The vendor tells me all these items will work together and operate at
133MHZ.
Can I get an opinion on this combination?

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>