> -----Original Message-----
>
> > >I cannot get my computer to recognize my serial mouse.  I'm running
> > >WIN95 on a FIC PA-2002 with a pentium 166 CPU.  The motherboard has
> > >on-board com ports, I've tried configuring the BIOS to recognize each
> > >one as COM1 (in the event one was bad) without luck. The board has a row
> > >of 5 pins that say MS_JMP on one end and PS/2_JMP on the other.  The
> > >manual gives no jumper setting for these, it only acknowledges them in
> > >the diagram.  Any ideas?

I have a friend that had a FIC board on which the serial Com Ports were dead.
See if you have another device that you can use to test the serial ports.

They sell PS/2 mouse connectors for the FIC boards, see if your board supports
a PS/2 mouse and get one of the connectors. I don't mean the plug that you
attach to the mouse to go from serial to PS/2, I mean the bracket with the PS/2
female plug and the cable on the other end goes attached to pins on the mobo.

HTH

Jose