What mb are you using?  RAM? My ram won't go even 1 mhz above 133, so to
improve FSB i have to run it at HSTCLK.  Furthest so far being 111mhz X 9.0,
it's only booted once or twice above 1ghz, 10 X 100 is super stable.  Win2K.


[evo]
[log in to unmask]
----- Original Message -----
From: "Ultra" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, January 25, 2001 6:01 AM
Subject: Re: [PCBUILD] ATHLON or Thunderbird safe operating temperature?


> this problem could be the Duron 600 itself. Early Duron CPUs were not
> designed to run as faster as later Duron. From Duron 750, you should be
able
> to overclock to 1Ghz or over without any problem (other than heat), but
> early Duron may limited to 900/950mhz or even lower. My Duron 650 will
> become unstable in DirectX game if I overclock it to 850 (core voltage
> 1.744v, if I rise it to 1.8v, it will be ok at 900mhz), after I belance
> performance and heat, I run it at current 800mhz.
>
> Jun Qian
>
> ----- Original Message -----
> From: "Gareth Cranny" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, January 25, 2001 10:32 AM
> Subject: Re: [PCBUILD] ATHLON or Thunderbird safe operating temperature?
>
>
> > My duron 600 runs at 1ghz all day long, at about 43C idle and 46 loaded
> > (@1.849v).  Thats with the case open because I only have two 80mm fans
in
> > there just now, I'll be adding 3 120mm's tonight.
> >
> > If the temperature ever goes to 52, she'll lock up.  Anything over 50
and
> I
> > get some graphics glitches and anomolies, but it could be my v3 @
178mhz.
> > I'm just using the VIA HWM for temps, which uses the KT7-R's under chip
> > thermistor.
> >
>
>             Do you want to signoff PCBUILD or just change to
>                     Digest mode - visit our web site:
>                    http://freepctech.com/pcbuild.shtml
>

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                   http://freepctech.com/pcbuild.shtml