> I recently replaced a motherboard for a client, and now when it boots it
> shows the wrong CPU speed. I double checked the jumpers against the
> charts in the mobo manual, and all appear to be set correctly. (66 MHz
> FSB, 3.5x multiplier)
>
> During POST, the BIOS reports a 240 MHz CPU. Is that 'normal' for this
> combination? Or have I missed a setting or jumper somewhere?
>
> FIC PA-2013 mobo
> AMD K6/233 CPU

i'm not sure this is going to help. i had the same problem but the bus
speed was 68MHZ not 66. also check if there is a jumper that has keywords
like turbo or anything like that

sami

         The PCBUILD web site always needs good submissions.  If
          you would like to contribute to the website, send any
               hardware tech tips or hardware reviews to:
                           [log in to unmask]