PCBUILD Archives

Personal Computer Hardware discussion List

PCBUILD@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Tony M." <[log in to unmask]>
Reply To:
Personal Computer Hardware discussion List <[log in to unmask]>
Date:
Sun, 22 Jan 2006 06:20:17 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (41 lines)
That is the bracket for your heat sink.  Even though you pressed the 
rivets back in to place, I would venture to guess that your heat sink is 
not maintaining proper contact with your CPU which would cause the CPU 
to overheat very quickly.  You can buy replacement heat sink brackets at 
electronics stores and probably on the web.  Replacing it is not an 
"easy" job, but it's not terribly difficult either.  I wouldn't attempt 
it as a "novice", but if you've replaced a motherboard in the past, you 
should be able to do this repair without any real problems.  The one 
sticking point on the last one I did is that the bottom of the bracket 
was actually coming in to contact with the solder points under the 
motherboard.  I had to improvise some plactic spacers.

Tony Mayer


Venkat Viswanathan wrote:

>Frank Suszka's post(clipped)
>
><<<<The items you looked at are capacitors.>>>
>
> Thanks, but I think that I have not been able to convey correctly in my post. since i could not figure out how to attach a pic of my mobo to the list "compose msg." page, I am giving below a link which shows the pic.
>
> http://tinyurl.com/792yo
>
>if you kindly look at the area surrounding the cpu you will see a black sort of oblong surrounding the cpu and four white RIVET sort of things at the four corners. these are actually plastic rivets with white heads and fit into four corresponding holes in the mobo. the heatsink/fan(intel) sits inside this oblong.
>what i meant to convey was that two of these rivets had come out from their holes in the width of the oblong and one could sort of lift this portion to a slant since the other portion was rivetted firmly. i just pressed these rivets carefully into place and made the whole thing firm. the noise of course continued and the system refused to boot. but that is another story.
>
>thanks again and good day---Venkat 
>
>        The NOSPIN Group has added a new feature on our website,
>           web based bulletinboard for questions and answers:
>              Visit our sister website at http://nospin.com
>
>  
>

        The NOSPIN Group has added a new feature on our website,
           web based bulletinboard for questions and answers:
              Visit our sister website at http://nospin.com

ATOM RSS1 RSS2