If the modem is plug-and-play, there will be no jumpers to have been reset,
but when the modem was tried in the other system, the operating settings
could have been changed when it was installed in the other computer.  As
has been suggested, don't try doing this all in one big step.  Get the
computer working with as little hardware as possible then add one and test
until it stops working again.  Then you will at least know where the
problem is.

At 09:12 PM 6/4/98 -0500, you wrote:
>
>It seems you should start at square 1.  Did you change any jumpers or other
>settings on the hardware when you attempted to install it in another
>machine?
>
>
>Mike Buraczewski
>
>-----Original Message-----
>From: Jaime Aguirre <[log in to unmask]>
>Subject: [PCBUILD] Getting back to normal
>
>|I took the parts out of this computer to try them somewhere else, i
>|tried to put them together again i have this messages, problems..
>
>